CBD Vaping Guide

Everything you should know to understand the manufacture process behind CBD E-liquids and how to choose the best.

If you are like most consumers with an interest in cannabis, for either recreational or medical purposes, you have probably seen thousands of different ‘CBD products’ everywhere in the last few years. Especially if you are a medical cannabis consumer, you are already aware of what CBD is, and why so many manufacturers are focused on this non-psychoactive compound of the Cannabis Sativa L plant. In fact, every day more and more studies are claiming new medical approaches and different ways of consumption.

It comes as no surprise that many people are confused by CBD suddenly being advertised in food products and cosmetics, in the forms of different oils, teas, crystals and e-liquids. In order to help users who are choosing which product would be better for them, info-CBD has created a guide to some of the most common CBD products available on the European market. In this article we mainly focus on vaping CBD products, how they are made, how they can be consumed and why it can be a valid and effective form of consumption.

What are CBD E-Liquids?

For vaping CBD, the best and most common way to use it is in the form of an e-liquid. E-liquids are the liquids that fuel an e-cigarette and they are vaporised by the battery powered atomiser, in order to imitate the sensation of smoking. It is normally composed of the following primary ingredients:


  • PG: Propylene glycol is non-toxic and has no smell. The “throat hit” sensation is due to the PG quantity in the e-liquid.
  • VG: Vegetal glycerine is a natural chemical derived from vegetable oil. The consistency is thicker than PG, and it is responsible for the amount of vapour produced.
  • Terpenes: they are compounds found in a variety of plants and contribute to their flavour, scent and colour. Terpenes interact synergistically with cannabinoids, enhancing their effects, and producing that effect known as the “entourage effect”.
  • CBD: Cannabidiol, that can be used in an isolated form, in the form of crystals, or with other cannabinoids, as part of a whole plant extraction.

Why Vaping is safer than Smoking?


During vaporization the raw material is not destroyed as there is no combustion, just evaporation at a far lower temperature. Thanks to the vapour passing through the plant fibres, cannabinoids are released into the air, but it also manages to keep them intact. In fact, the active substances (cannabinoids, terpenes and flavonoids) are contained within the resin of the leaves and flowers and, thanks to the heat, they transform into vapour and can be inhaled in its entirety, without leaving any ash or releasing any toxic substances. In fact, when vaporized, cannabis releases a vapour composed of 95% of the active cannabinoids, without any destruction.


Smoke is produced by the combustion of leaves. Once plants are dried out, they burn entirely, leaving just ashes and releasing some substances into the air, such as THC and CBD. But at the same time, it also releases many other toxins. By analysing the smoke released by a joint, it was found that only the 12% of it was composed of cannabinoids, and all the remaining parts were just toxic substances of combustion such as carbon dioxide (CO2), carbon monoxide, nitric acid, hydrocarbons, and carbonyl compounds, which are all harmful for our body.




Highly Variable

Ease of Use

Medium / Easy

Onset Timing

1-2 min


Medium / High

Administration of CBD by Inhalation

The quickest form of absorbing CBD is through inhalation. CBD is heated by a vape pen’s electrical components turning the liquid into vapor. This vapor is then inhaled and the compounds go directly into the bloodstream, through the lungs, resulting in rapid onset of effect. This instant access to the circulatory system allows the effects to kick in within a few seconds or minutes after consumption. Compared to ingestion, topical and sublingual administrations, the inhalation method allows more CBD to be absorbed faster.
Studies have shown that vaping can offer bioavailability levels between 30 and 40%, depending on the user’s profile.

Since there is generally no wait time to feel the effects of these products, they are excellent choices for individuals looking for quick ways to help relieve ailments, especially for unexpected ones such as migraines, bouts of anxiety and/or panic attacks. Many people simply use these products by taking small ‘hits’ or inhales of CBD vapor throughout the day.

How to vape CBD

Over the years, vaping is being recognised more and more as an alternative to tobacco, also known as e-cigarettes, and equally, CBD can also be found in forms of e-liquids. Vaping is the fastest method of administration and the effects can be observed almost immediately. In just a few seconds after inhalation, the compounds go straight into the respiratory system, into the blood stream and immediately spreads throughout the entire body.

1 - Get your Equipment & E-liquid

If you have not already purchased your vaporizer or CBD e-liquid, that is the first step. You can buy them online or from local shops.

2 - Learn how to use it

Using a vape pen is quite simple. Here you have a video explaining it.

3 - Vape & enjoy

Simply turn on your vape pen and inhale. If you are not sure about how much liquid to take, the general rule is to start with a small dose and, if you are not feeling the desired effects, slowly increase.

4 - Keep it clean

Keeping your vape pen clean is the best way to ensure there would not remaining nanoparticles and your taste experience is great every time. Vaping devices can develop mould and bacteria if not properly taken care of.

How are CBD E-Liquids manufactured?

Carrier Liquids
Cannabis Content

Carrier Liquids

The most common carrier liquids for CBD e-liquids are vegetable glycerine (VG) and propylene glycol (PG). Some CBD producers also use oily liquids, such as MCT oils or olive oil, which we strongly suggest you not to use due to possible dangerous substances which results from an oily solution reaching its boiling point. Many CBD manufacturers of e-liquids prefer mixing VG and PG, because it offers some benefits from both substances. This is maybe the best option by far. For example, by keeping 20% of VG in the mixture, it retains its nice taste and thickness as well as producing a healthier vaporisation. While at the same time, it maintains a good “throat hit” sensation from PG. Additionally, by mixing the two liquids, it can reduce the likelihood of PG causing allergic reactions.There are many different solvents employed to extract CBD from the plant, and each of them produces different cannabinoid extracts. Moreover, CBD oil producers have to upgrade their production methods and employ the cleanest and safest extraction process available. The two most common extraction methods use CO2 and Ethanol.

Cannabis Content

The source of the CBD and terpenes is important. The hemp cultivation should be of high quality, free from the exposure to any chemicals or pollutants. But, one of the most important factors is the extraction method used. Some companies use pharmacy grade ethanol which allows the extraction of the whole phytocomplex from the plant, as well as other minor cannabinoids, terpenes and flavonoids. On the other hand, other manufacturers use supercritical CO2 extraction, resulting in the purest form of extracted CBD, containing no other compound from the cannabis plants. Full spectrum CBD e-liquids may offer more benefits than pure CBD e-liquids, since the cannabis’ extracted ingredients can work together producing greater effects. This is known as the entourage effect.

Flavours and Benefits of Terpenes

Terpenes can be found in the essential oils of many plants with the purpose of defending the plant against environmental stressors and to attract insects for pollination. Terpenes work in several ways and they can differ in taste and smell. The aromatic scent of every cannabis strain and their extracts mainly depends on its terpenes profile, creating unique variations of flavours. Moreover, for a long time and even more over the last few years, more attention is being paid to the cannabis plants’ chemical compositions especially in a medical prospective. Terpenes are gaining more and more importance as supplementary boosters to the therapeutic cannabinoids.

Pros and Cons of Vaping CBD

Fast Relief

By vaping the e-liquid, the CBD in it will be released in the form of a vapour, which will be directly absorbed by the lungs and distributed to the whole body through the bloodstream.

Ease of use

This is mainly true for people that already vape or smoke. If you are new to vaping, just put a few drops of CBD e-liquid into the refillable tank or cartridge and inhale slowly.

Good taste

Vaping CBD e-liquids can sometimes provide the actual taste of cannabis strains. While other CBD products may have bad tastes or no taste, CBD vape juices come in many flavours, added naturally in the form of terpenes or artificial flavouring substance.

Health risks

When vaping there should be some techniques and temperatures to be aware of. Moreover, people with lung conditions should avoid it for possible complications.

Difficult to dose

Vaping CBD does not offer fixed doses and you will never be aware of how much CBD you are inhaling through a hit. This could represent a problem from a medical point of view.

Ready to find the perfect CBD E-Liquid product for you?

Consult our comparative table of the main CBD E-Liquids in the European market and have a look at what we recommend as trustworthy and safe.

Products Comparison

    Products Comparison


      Top rated Brands

      Medi Hemp

      All our reviewed CBD products

      Top Categories

      Best Sublinguals

      Shop Now

      Best Cosmetics

      Shop Now

      Best Edibles

      Shop Now